1. Танилцуулга
1050 H22 aluminum sheet for license plates is one of the most widely used materials in vehicle registration plate manufacturing worldwide.
Thanks to its high aluminum purity (≥99.5%), маш сайн зэврэлтэнд тэсвэртэй, outstanding embossing performance, хөнгөн шинж чанар, болон зардлын үр ашиг, 1050 H22 aluminum has become the preferred substrate for passenger vehicle, commercial vehicle, motorcycle, and specialty license plates.
The H22 temper provides an ideal balance between strength and formability, enabling manufacturers to produce clear embossed characters without cracking or deformation.
Combined with reflective films, хөшиг, and anti-counterfeiting technologies, 1050 H22 aluminum sheets deliver long-lasting durability and visibility under diverse environmental conditions.
Гантай харьцуулахад, зэвэрдэггүй ган, and plastic alternatives, 1050 H22 aluminum offers superior corrosion resistance, lower weight, easier processing, and excellent recyclability.
These advantages make it the standard choice for modern license plate production.
2. Юу вэ 1050 H22 Aluminum Sheet for License Plates?
2.1 Юу вэ 1050 Хөнгөн цагааны хайлш?
1050 хөнгөн цагааны хайлш -д харьяалагддаг 1xxx цуврал хөнгөн цагааны, known for its томт (хамгийн бага хэмжээ 99.5% хөнгөн цагаан) мөн зэврэлтэнд маш сайн тэсвэртэй.
It is a non-heat-treatable alloy that offers outstanding formability and is widely used in applications requiring superior surface finish and moderate strength.
2.2 Химийн найрлага 1050 Хөнгөн цагааны хайлш
| Элемент | Ердийн агуулга | Чиг үүрэг / Цохилт |
|---|---|---|
| Хөнгөн цагаан | ≥99.50% | Provides corrosion resistance, уян хатан чанар, хөнгөн жин, болон бүрэх нийцтэй байдал |
| Төмөр | ≤0.40% | Influences strength, grain behavior, and surface appearance |
| Цахиур | ≤0.25% | Affects formability and surface consistency |
| Зэс | ≤0.05% | Kept low to protect corrosion resistance |
| магни | ≤0.05% | Хяналттай хольц |
| Манган | ≤0.05% | Хяналттай хольц |
| Цайр | ≤0.05% | Хяналттай хольц |
| Титан | ≤0.03% | May support grain control |
| Азтай хандуул | ≤0.05% | Controlled trace element |
The high aluminum content gives 1050 its key advantage: clean formability and strong outdoor corrosion resistance.
2.3 What Does H22 Temper Mean?
The temper designation is the most critical factor for license plate manufacturing. "H22" represents a specific thermomechanical history:
- H2 (Хатуу хатуурсан ба хэсэгчлэн анивчих): The metal is cold-rolled to increase its strength (суналтын хатуурал) and is then passed through a thermal furnace to partially soften it back to a specific mechanical state.
- 2 (Quarter-Hard): The number '2' signifies the degree of final hardness. It represents a "quarter-hard" муж, positioning the metal perfectly between fully annealed (O-ааш зан, completely soft) and half-hard (H24).
Энэ "quarter-hard sweet spot" means the metal retains enough yield strength to remain flat and rigid on a vehicle bumper, but is ductile enough to endure the deep, localized stretching required to emboss 3D letters and numbers without tearing or "orange-peeling" at the edges.
2.4 Why License Plates Use 1050 Хөнгөн цагаан
License plate manufacturers choose 1050 aluminum because it matches the actual working conditions of vehicle plates.
Main advantages include:
- Хөнгөн жин: aluminum density is about 2.70 г/см³, much lower than steel.
- No red rust: aluminum forms a natural oxide layer that helps resist corrosion.
- Good embossing formability: raised letters and numbers can be stamped cleanly.
- Surface compatibility: suitable for paint, бүрэх, аноджуулах, and reflective film.
- Mass-production efficiency: easy to shear, punch, хавтгай / тэгш, and blank.
- Дахин боловсруулах чадвар: aluminum scrap from blanking and punching has recovery value.
3. -ийн техникийн үзүүлэлтүүд 1050 H22 Aluminum Sheet for License Plates
| Параметр | Ердийн шаардлага |
|---|---|
| Бүтээгдэхүүний нэр | 1050 H22 aluminum sheet for license plates |
| Хайлш | 1050 |
| Ааш зан | H22 |
| Хөнгөнсний агуулга | ≥99.50% |
| Зузаан | Customized according to local plate standard |
| Өргөн / урт | Ороомог, хуудас, or cut-to-size blank |
| Гадаргуу | Цэвэр, хавтгай, газрын тосны хяналттай |
| Дуусга | Тээрмийн өнгөлгөө, бүрсэн, тэнцсэн, аноджуулсан, or film-ready |
| Хавтгай байдал | High flatness for printing, ламинат, and embossing |
| Ирмэгийн чанар | Smooth edge, low burr |
| Сав баглаа боодол | Moisture-proof packaging |
| Дч дүрэм | Тээрмийн туршилтын гэрчилгээ, dimension report, surface inspection report |
Common license plate sheets often fall around 0.6-1.2 мм зузаан, depending on country, plate type, embossing depth, and rigidity requirements.
Final thickness should follow the applicable local vehicle registration plate standard.
4. Механик болон физик шинж чанарууд
| Өмч | Ердийн лавлагаа / Төвлөр | Importance for License Plates |
|---|---|---|
| Нягт | Тухай 2.70 г/см³ | Lightweight finished plate |
| Aluminum purity | ≥99.50% | Corrosion resistance and surface quality |
| Ааш зан | H22 | Balance of strength and embossing formability |
| Суналтын бат бэх | Дунд зэрэг, specification-controlled | Prevents easy bending during use |
| Ургацын хүч | Controlled by H22 temper | Helps plate keep shape |
| Сунгах | Adequate for embossing | Reduces cracking risk |
| Дулаан дамжуулалтын | High among common metals | Supports coating curing and heat transfer |
| Зэврэлтэнд тэсвэртэй | Excellent in normal outdoor service | Long-term plate durability |
| Гадаргуугийн чанар | Clean and uniform | Supports printing, бүрэх, and reflective film |
Because mechanical properties vary by thickness and production route, buyers should rely on the supplier’s mill test certificate for final values.
5. Үйлдвэрлэлийн үйл явц 1050 H22 Aluminum Sheet for License Plates
Үйлдвэрлэлийн процесс нь 1050 H22 aluminum sheet for license plates must control both the aluminum substrate and the final surface condition.
License plate production requires clean surfaces, stable flatness, accurate thickness, and reliable embossing performance.
Тиймээс, each production stage affects the final plate’s appearance, бат бөх чанар, and processing efficiency.
5.1 Raw Material Selection and Alloy Control
Production starts with high-purity aluminum raw material.
Түүнээс хойш 1050 хөнгөн цагаан агуулсан ≥99.50% aluminum, the mill must control impurity elements such as iron, цахиур, зэс, магни, манган, Цуулах Нар.
For license plates, chemical consistency matters because different batches must behave similarly during blanking, тамгалах, бүрэх, and reflective film lamination.
5.2 Хайлуулах, цутгах
The selected aluminum is melted and cast into slabs or coils. During melting, the producer controls temperature, хогийн өрөө, шүүлтүүр, and impurity levels to reduce inclusions, oxide particles, and internal defects.
5.3 Homogenization and Hot Rolling
Цутгасны дараа, homogenization improves the internal structure of the aluminum and reduces segregation.
Hot rolling then reduces the material thickness and prepares it for cold rolling.
Good hot rolling control helps produce a more uniform sheet, which later improves flatness and embossing consistency.
5.4 Cold Rolling to Target Gauge
Cold rolling further reduces the sheet to the required thickness.
For license plate materials, common thickness ranges may be around 0.6-1.2 мм, depending on local standards, plate type, and embossing depth.
Cold rolling improves dimensional accuracy and surface smoothness. It also increases strength through strain hardening, which is necessary before final H22 temper control.
5.5 H22 Temper Control
The H22 temper is achieved through strain hardening and partial annealing.
This step gives the material a quarter-hard condition, balancing strength and formability.
If the temper is too soft, the finished plate may bend too easily. Хэт хэцүү бол, the embossed areas may crack or show surface damage.
5.6 Tension Leveling and Flatness Correction
Flatness is critical for license plates, especially when the sheet will receive printing, бүрэх, or reflective film.
Tension leveling reduces waves, internal stress, and shape defects.
Poor flatness can cause film bubbles, printing misalignment, uneven embossing, or plate warping.
5.7 Surface Cleaning and Pretreatment
Бүрэхээс өмнө, уран зураг, аноджуулах, or reflective film bonding, the aluminum surface must be clean and oil-controlled.
Cleaning removes rolling oil, metal fines, тоос, хуруугаараа нь, and oxidation residues.
This stage directly affects coating adhesion and reflective film bonding.
If oil or dust remains on the surface, the plate may suffer from coating peeling, film delamination, буцаан эд, or poor weather resistance.
5.8 Зүсэх, Үлцэл, and Edge Control
The aluminum sheet may be supplied as coil, full sheet, зурвас, or cut-to-size blanks.
License plate manufacturers often require precise dimensions to match plate standards and stamping dies.
Low-burr edges improve safety and reduce problems during coating, ламинат, ба суурилуулах.
5.9 Бүрэх, Уран зураг, or Reflective Film Preparation
Depending on the final license plate system, the sheet may be prepared for different surface processes.
Common surface routes include:
| Surface Route | Зорилго |
|---|---|
| Тээрмийн өнгөлгөө | For downstream coating or film lamination |
| Primer-coated sheet | Improves paint or film adhesion |
| Painted sheet | Provides background color |
| Anodized sheet | Improves surface durability and appearance |
| Reflective film-ready sheet | Supports traffic-grade reflective plate production |
For reflective license plates, гадаргуугийн цэвэр байдал, тэгш байдал, and adhesion performance are especially important because the film must remain bonded under UV exposure, бороо, халуун, cold, and washing chemicals.
6. -ийн програмууд 1050 H22 Aluminum Sheet for License Plates
Due to its excellent formability, зэврэлтэнд тэсвэртэй, хөнгөн шинж чанар, and compatibility with reflective coatings, 1050 H22 aluminum sheet has become the standard material for license plate manufacturing worldwide.
Its versatility enables it to meet the requirements of various vehicle registration systems and identification applications.
6.1 Passenger Vehicle License Plates
Passenger cars represent the largest market for license plate production.
Typical Requirements
- Clear embossed characters
- Өндөр тусгал
- Цаг агаарын эсэргүүцэл
- Long service life
Most passenger vehicle license plates use aluminum sheets with thicknesses ranging from: 0.8-1.0 мм to balance rigidity and lightweight performance.
6.2 Commercial Vehicle Registration Plates
Commercial vehicles operate under more demanding conditions than passenger vehicles.
Common Vehicles
- Жинсөн худалдаа
- Авт "яв
- Logistics vehicles
- Construction equipment
Typical Sheet Thickness
Commercial vehicle plates generally use: 1.0-1.2 мм зузаан 1050 H22 aluminum sheets.
The H22 temper provides sufficient strength while maintaining excellent embossing characteristics.
6.3 Motorcycle License Plates
Motorcycle license plates require lightweight materials due to size constraints and exposure to environmental conditions.
Ердийн зузаан
Motorcycle plates commonly use: 0.5–0.8 mm thick aluminum sheets.
Despite the reduced thickness, the material maintains adequate stiffness and durability.
6.4 Government and Official Vehicle Plates
Government agencies often require higher-quality registration plates with enhanced durability and security features.
- Police vehicles
- Military vehicles
- Government fleets
- Diplomatic vehicles
Additional Requirements
- Anti-counterfeiting elements
- Reflective coatings
- Special color systems
- Long service life
The smooth surface and excellent coating compatibility of 1050 H22 aluminum make it ideal for advanced security plate production.
6.5 Specialty and Customized License Plates
Many regions offer personalized or specialty license plates.
- Personalized vehicle plates
- Commemorative plates
- Collector vehicle registrations
- Promotional vehicle identification plates
7. 1050 H22 Aluminum Sheet vs Alternative Materials
Selecting the right material for license plates requires evaluating multiple factors, including durability, зэврэлтэнд тэсвэртэй, жин, ажиллах, даа.
The following comparison highlights the advantages of 1050 H22 aluminum sheet relative to other commonly used materials.
Comprehensive Material Comparison
| Өмч | 1050 H22 Aluminum | Carbon Steel | Зэвэрдэггүй ган 304 | Plastic Composite | 3003 Хөнгөн цагаан |
|---|---|---|---|---|---|
| Нягт (г/см³) | 2.71 | 7.85 | 8.00 | 1.3–1.8 | 2.73 |
| Жингийн давуу тал | ★★★★★★★ | ★★ | ★ | ★★★★★★★ | ★★★★★★★ |
| Зэврэлтээс хамгаалах эсэргүүцэл | Маш сайн | Дунд зэрэг | Маш сайн | Сайн байна | Маш сайн |
| Embossability | Маш сайн | Сайн байна | Дунд зэрэг | Хөөрхий | Сайн байна |
| Reflective Film Adhesion | Маш сайн | Сайн байна | Сайн байна | Дунд зэрэг | Сайн байна |
| Outdoor Durability | Маш сайн | Дунд зэрэг | Маш сайн | Дунд зэрэг | Маш сайн |
| Surface Finish Quality | Маш сайн | Сайн байна | Сайн байна | Дунд зэрэг | Сайн байна |
| Дахин боловсруулах чадвар | 100% | 100% | 100% | Хязгаарлагдмал | 100% |
| Processing Efficiency | Маш сайн | Дунд зэрэг | Дунд зэрэг | Өндөр | Маш сайн |
| Материалын зардал | Дунд зэрэг | Бага | Өндөр | Дунд зэрэг | Дунд зэрэг |
| Maintenance Requirement | Маш бага | Өндөр | Бага | Дунд зэрэг | Бага |
| Typical Service Life | 10–20 Years | 5–10 Years | 15–20 Years | 3–8 Years | 10-15 жил |
| License Plate Suitability | ★★★★★★★ | ★★★★★ | ★★★★★ | ★★ | ★★★★★ |
8. Яагаад Huawei сонгох вэ? 1050 H22 Aluminum Sheet for License Plates
Хэнань Huawei Aluminium Co., Ltd. хөнгөн цагаан хуудас нийлүүлдэг, ороомог, зурвас, and foil products for packaging, тээвэрлэлт, тэмдэг, болон аж үйлдвэрийн програмууд.
For license plate producers, supplier consistency is critical because small changes in temper, гадаргуугийн цэвэр байдал, or thickness can affect embossing quality and film adhesion.
Huawei can support 1050 H22 aluminum sheet for license plates хамт:
- 1050 aluminum sheet supply with ≥99.50% aluminum content
- H22 temper control for embossing and plate rigidity
- Захиалгат зузаан, өргөн, урт, and cut-to-size blanks
- Тээрмийн өнгөлгөө, бүрсэн, or film-ready surface options
- Flatness and surface quality control
- Чийгийн хамгаалалттай экспортын савлагаа
- Тээрмийн туршилтын гэрчилгээ ба багцын ул мөр
- Sample support for embossing, бүрэх, хэвлэх, or reflective film trials
Before ordering, buyers should provide plate size, зузаан, embossing depth, бүрэх систем, reflective film type, surface requirement, and packaging preference.
9. Дүгнэлт
1050 H22 aluminum sheet for license plates is a reliable material for modern vehicle registration plates.
Its high aluminum purity, зэврэлтэнд тэсвэртэй, moderate H22 strength, good embossing formability, and surface treatment compatibility make it suitable for both embossed and reflective license plate systems.
Худалдан авагчид, successful sourcing depends on more than alloy name. Зузаан хүлцэл, тэгш байдал, гадаргуугийн цэвэр байдал, edge quality, temper consistency, бүрэх нийцтэй байдал, and supplier traceability all affect production performance.
Сайн хяналттай 1050 H22 aluminum sheet helps manufacturers produce license plates that are durable, readable, дур булаасан, and cost-effective.
Түгээмэл асуултууд
1. Юу вэ 1050 H22 aluminum sheet used for?
It is used for license plates, vehicle number plates, motorcycle plates, trailer plates, reflective plates, traffic tags, тэмдэг, болон нэрийн хавтан.
2. Яагаад гэж 1050 aluminum suitable for license plates?
1050 aluminum offers high purity, маш сайн зэврэлтэнд тэсвэртэй, good embossing formability, хөнгөн жин, and strong compatibility with coating and reflective film.
3. What does H22 temper mean?
H22 means the aluminum has been strain-hardened and partially annealed to a quarter-hard condition. It provides a balance of strength and formability.
4. Чадах 1050 H22 aluminum sheet be embossed?
Тиймээ. H22 temper is suitable for embossing raised letters, numbers, borders, and symbols when thickness and tooling are properly matched.
5. What thickness is used for license plates?
Many license plate sheets use thicknesses around 0.6-1.2 мм, but the exact value depends on local plate standards and production requirements.
6. байна 1050 хөнгөн цагаан зэврэлтэнд тэсвэртэй?
Тиймээ. 1050 aluminum has excellent corrosion resistance in normal outdoor conditions because of its high aluminum content and natural oxide layer.
7. Can reflective film bond to 1050 хөнгөн цагаан?
Тиймээ, if the surface is clean, хавтгай, газрын тосны хяналттай, and properly treated. Surface preparation strongly affects bonding strength.
8. How should 1050 H22 aluminum sheets be stored?
Store them in a dry, clean warehouse. Avoid moisture, corrosive chemicals, тоос, зураас, and condensation before coating or lamination.
Шүүмж
Тойм байхгүй байна.