Brief introduction of aircraft grade aluminum

Aircraft-grade aluminum sheet and plate refer to high-quality aluminum materials specifically designed and manufactured for use in the aviation industry. These materials are known for their excellent strength-to-weight ratio, corrosion resistance, and durability, making them suitable for various aircraft components and structures.

Some common characteristics of aircraft-grade aluminum sheet and plate include:

Alloy Selection:

Aircraft-grade aluminum is typically made from specific aluminum alloys that provide the desired combination of strength, lightweight properties, and corrosion resistance. The most commonly used alloys include 2024, 6061, 7075, and 7075-T6.

High Strength:

These aluminum alloys are heat-treated to enhance their strength, making them capable of withstanding the stresses and loads experienced during flight. The heat treatment process may involve processes like solution heat treatment and precipitation hardening.

Lightweight:

Aluminum is known for its low density, which contributes to reducing the overall weight of an aircraft. Lighter aircraft are more fuel-efficient and have improved performance.

Corrosion Resistance:

Aircraft-grade aluminum is often treated with protective coatings or anodizing to enhance its corrosion resistance, ensuring that it can withstand the harsh environmental conditions encountered during flight, including exposure to moisture and salt.

Machinability:

These materials are designed to be easily machinable, allowing for precise fabrication of aircraft components and structures.

Toughness:

Aircraft-grade aluminum should also exhibit good toughness properties, which are essential for absorbing impacts and handling dynamic loads during flight.

Certification:

To meet aviation safety standards, manufacturers of aircraft-grade aluminum sheet and plate often adhere to strict quality control and certification processes. This ensures that the materials meet the necessary specifications and standards for use in aircraft construction.

Applications:

Aircraft-grade aluminum is used in a wide range of aircraft components, including wings, fuselages, landing gear, structural supports, and various interior and exterior components. It is also used in the aerospace and defense industries for similar reasons.

Aircraft Grade Aluminum Sheet

Aircraft Grade Aluminum Sheet/Plate

Sheet vs. Plate:

In terms of form, aircraft-grade aluminum can be found in both sheet and plate forms. Sheets are typically thinner, while plates are thicker. The choice between sheet and plate depends on the specific application and structural requirements.

Different grades of aviation aluminum sheets are applied to different aircraft components

At present, the aluminum alloy used in aircraft structure in the world is mainly high-strength 2 series (2024, 2017, 2A12, etc.) and ultra-high-strength 7 Series (7075, 7475, 7050, 7A04, etc.), in addition, there are some 5 Series (5A06, 5052, 5086, etc.) and 6 Series (6061, 6082, etc.) and a small number of other series of aluminum materials.

2024 T3 Aluminum Sheet:
This is the most common of the high-strength aluminum alloys. It is of high-grade aircraft quality. The 2024-T3 aluminum sheet is thought of as the aircraft alloy because of its strength and it also has excellent fatigue resistance. Welding is generally not recommended. Typical uses for 2024-T3 Alclad aluminum sheet are fuselage and wing skins, cowls, aircraft structures, and also for repair and restoration because of its shiny finish (2024-T3 Alclad).

2024 aluminum plate used for fuselage and wing skin

3003 H14 Aluminum Sheet:
Most widely used of aluminum alloys, pure aluminum with manganese added for strength, approx 20% stronger than the 1000 series(purre aluminium). 3003-H14 aluminum sheet has great workability and may be deep drawn, spun, welded, or brazed. 3003 aluminum sheet is NON-heat treatable. This aluminum sheet is widely used for cowls and baffle plating.

5052 H32 Aluminum Sheet:
This one has the highest strength in the NON-heatable alloy series. It is not structural. 5052 aluminum sheet has higher fatigue strength than most alloys. 5052 aluminum sheet has excellent corrosion resistance, particularly in marine applications and has excellent workability. 5052 aluminum sheet is commonly used to built fuel tanks.

5083 aluminum sheet:
5083 aluminum sheet belongs to Al-Mg-Si aluminium alloys. Its main contents are Magnesium and Silicon except for Aluminium. Over 4.0% of Magnesium enables 5083 aluminum sheets to have excellent resistance to correction and are easily welded. By adding copper, 55083 aluminum sheet has 28% Electrical conductivity. 5083 aluminum sheet also has good forming characteristics for either hot or cold working. But hardening is accomplished by means of cold working only. Besides, the 5083 aluminum sheet does have good strength but is non-heat-treatable.

6061 T6 Aluminum Sheet:
This alloy has very good corrosion resistance and finishing ability, welding goes without any problems too. The strength level of the 6061-T6 aluminum sheet is about that of mild steel. The 6061-T6 aluminum sheet can be fabricated by most of the commonly used techniques. Typical uses are aircraft landing mats, truck bodies and frames, structural components, and more.

7075 Aluminum Sheet:
Aircraft manufacturers use high-strength alloys (principally alloy 7075) to strengthen aluminum aircraft structures. Aluminum alloy 7075 has Copper (1.6 %), Magnesium (2.5 %) and zinc (5.6 %) added for ultimate strength, but the copper content makes it very difficult to weld. On the other hand, it anodizes really beautifully. 7075 has the best machinability and it will result in a very nice finish.

Aircraft Aluminum Sheet Grades

Aircraft Aluminum Sheet Grades

What is the difference between aircraft aluminum and regular aluminum?

Aircraft aluminum, also known as aircraft-grade aluminum, and regular aluminum differ primarily in terms of their specific alloy compositions, mechanical properties, and manufacturing processes. These differences make aircraft-grade aluminum suitable for aerospace and aviation applications, while regular aluminum is used for a wide range of everyday applications. Here are some key distinctions:

  1. Alloy Composition:
    • Aircraft Aluminum: Aircraft aluminum is made from specific high-strength aluminum alloys that are carefully engineered to meet the rigorous demands of the aviation industry. Common alloys include 2024, 6061, and 7075, among others. These alloys often contain additional elements like copper, zinc, and magnesium to enhance strength, corrosion resistance, and other properties.
    • Regular Aluminum: Regular or commercial aluminum typically refers to common alloys like 1100, 3003, and 5052. These alloys are more straightforward in composition and may not have the same level of strength or specialized properties as aircraft-grade alloys.
  2. Strength and Mechanical Properties:
    • Aircraft Aluminum: Aircraft-grade aluminum alloys are chosen for their high tensile strength, yield strength, and fatigue resistance. They are designed to withstand the stresses and loads experienced during flight.
    • Regular Aluminum: Regular aluminum alloys may have lower strength compared to aircraft-grade alloys, making them suitable for a wide range of non-critical applications but less ideal for high-stress situations.

aluminum sheet 7075

Huawei Aluminum Quotation

Date LME LME Weekly Price 2023-04 LME Average 2023-04 SMM Average
2023-05-03 2330$ 2333.3$ 2341.00$ 2712.08$
2023-05-02 2353$
2023-04-28 2342$
2023-04-27 2302$
2023-04-26 2339.5$
Notes

1. Prices are updated at 10:00 am on weekdays.
2. The price of our products will change in real time according to the fluctuation of LME, Exchange rate.
3. For more prices, please refer to our price page 2022 Aluminum Price.