Có thể 1 tấm nhôm mm được uốn cong?

Có thể 1 mm tấm nhôm be bent?

 

Ngày thứ nhất, thần thái là quan trọng nhất. The temper of the tấm nhôm is divided into full hard, nửa cứng, và tính tình mềm mỏng (thường thì tính khí mềm mỏng được gọi là tính khí O).

Hiệu ứng uốn cứng về cơ bản là không thể (the temper of the tấm nhôm is H18, H19, H38, Vân vân. tất cả đều khó)

The semi-rigid tấm nhôm can basically be bent (H24 is also semi-rigid)

O-temper bending is definitely no problem, Hiệu ứng uốn cong của hoàn toàn cứng về cơ bản là không tốt, it is basically less used in this temper.

The second is whether you choose pure aluminum or alloy aluminum

The hardness of pure aluminum is not very good. It can be used with 1100, 1050, 1060, Vân vân., 1100 H24 is recommended.

The alloy aluminum has a better hardness, and it can be used in semi-hard tempers such as 3003, 3005, và 5052.

It is recommended that the sample be re-determined for specific conditions. If the hardness of 6061, 2024, 7075 is too high, especially in the T6 temper, it should not be bent unless it is heated and then folded.