3004 alyuminiy xususiyatlari.
3004 alyuminiy qatlam tavsifi.
aluminum alloy al 3004 properties is an alloy in the wrought aluminium-manganese family (3000 yoki 3xxx seriyali).
It is similar to the 3003 qotishmalar, except for the addition of approximately 1% magniy.
Sovuq ishlov berish mumkin (lekin emas, alyuminiy qotishmalarining ba'zi boshqa turlaridan farqli o'laroq, issiqlik bilan ishlangan) yuqori quvvatga ega, ammo egiluvchanligi past bo'lgan temperlarni ishlab chiqarish.
Ko'pgina boshqa alyuminiy-marganets qotishmalari kabi, 3003 is a general-purpose alloy with moderate strength, good workability, and good corrosion resistance. It is commonly rolled and extruded, but typically not forged.
Dovlangan qotishma sifatida, it is not used in casting.
al 3004
3004 alyuminiy qatlamni qo'llash.
Al 3004 is commonly used to produce the body of cans, the light components. It can also be used for the processing and storage equipment of chemical products, sheet processing, some construction tools, va boshqalar.
It was developed to satisfy the need for thinner gauges in can-stock, and thereby to some extent replaced its predecessor 3003 alloys in the making of beverage cans. Can-stock can be made thinner due to the addition of 1% magniy, which contributes to solid solution strengthening.
3004 alyuminiy qatlamni qo'llash
AL 3004 sheet parameter.
3004 alyuminiy qatlam kimyoviy tarkibi | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Elementlar | Va | Fe | Cu | Mn | Mg | Cr | Zn | Of | Boshqalar | Al | |||
Tarkib (maks) | 0.30 | 0.70 | 0.25 | 1.0-1.5 | 0.8-1.3 | - | 0.25 | 0.23 | 0.15 | 95.6-98.2 |
3004 aluminum sheet properties | |||||
---|---|---|---|---|---|
Qotishma | Jahl | Qalinligi(mm) | Kengligi(mm) | Uzunlik(mm) | Oddiy mahsulotlar |
3004 alyuminiy qatlam | F,H112,O,H111,H12 H22 H32 H14,H24 H34 H16 H26 H18,H28 H38 | 0.2-350 | 100-2600 | 500-16000 | Heat sink materials such as liquid crystal back |
ning mexanik xususiyatlari 3004 Alyuminiy varaq | ||||||||
---|---|---|---|---|---|---|---|---|
The compressive strength | The yield strength | cho'zilish | The shear strength | Fatigue strength | Modulus of elasticity | The shear modulus | Poisson's ratio | Hardness HB |
150-285M | 60-220M | 20% | 80-120M | 50-75M | 71E | 27G | 31μ | 25-55 |
3004 alyuminiy qatlamli qadoqlash.
3004 aluminum sheet of Henan Huawei Aluminum. eksport standartiga javob beradi. Plastik plyonka va jigarrang qog'oz mijozlarning ehtiyojlariga ko'ra qoplanishi mumkin.
Yana nima, mahsulotlarni etkazib berish paytida shikastlanishdan himoya qilish uchun yog'och quti yoki yog'och pallet qabul qilinadi.
Ikki xil qadoqlash mavjud, Devorga yoki osmonga ko'z.
Mijozlar o'zlariga qulaylik uchun ulardan birini tanlashlari mumkin. Umuman aytganda, lar bor 2 tonnani bitta paketda, va yuklash 18-22 1 × 20 'konteynerda tonna, va 20-24 tonna 1×40' konteynerda.
3004 alyuminiy qatlamli qadoqlash
3004 alyuminiy
3004 aluminum description
alyuminiy 3004 is a medium-strength aluminum alloy whose main alloying elements are manganese and magnesium. It is stronger than 3003 qotishma, but less ductile.
3004 aluminum alloy is an alloy in the wrought aluminum-manganese series (3000 yoki 3xxx seriyali). It is similar to 3003 qotishma, except that about 1% magnesium is added. Sovuq ishlov berish mumkin (but unlike other types of aluminum alloys, which require heat treatment) to produce a temper with higher strength but lower ductility. Ko'pgina boshqa alyuminiy-marganets qotishmalari kabi, 3003 is a general-purpose alloy with moderate strength, good machinability, and good corrosion resistance. It is usually rolled and extruded, but not usually forged. Dovlangan qotishma sifatida, it is not used for casting.
strongest aluminum alloys
Qotishma 3004 is commonly used in the manufacture of beverage cans. It was developed to meet the need for thinner gauges in can stock, thus replacing its predecessor, 3003 qotishma, in the manufacture of beverage cans. With the addition of 1% magniy, the can material can be made thinner, which aids in solid solution strengthening.
Common tempering state of 3004 alyuminiy
Alloy-Temper |
Mustahkamlik chegarasi (ksi) |
Hosildorlik kuchi (ksi) |
Cho'zilish (%) |
3004-O | 26 | 10 | 19 |
3004-H34 | 39 | 29 | 5 |
3004-H38 | 41 | 36 | 4 |
Huawei alyuminiy kotirovkasi
Sana | LME | LME haftalik narxi | 2023-04 LME o'rtacha | 2023-04 SMM o'rtacha |
2023-05-03 | 2330$ | 2333.3$ | 2341.00$ | 2712.08$ |
2023-05-02 | 2353$ | |||
2023-04-28 | 2342$ | |||
2023-04-27 | 2302$ | |||
2023-04-26 | 2339.5$ | |||
Eslatmalar
1. Narxlar yangilangan 10:00 ish kunlaridaman. |