Ⅰ: Aluminum strip

Ⅰ-a: What is a custom-width aluminium strip?

The raw material of the aluminum strip is pure aluminum or aluminum alloy cast rolled aluminum coil, hot rolled aluminum coil, rolled by cold rolling machine into different thickness and width of thin aluminum coil, and then according to the use, longitudinally slit by slitting machine into different width of aluminum strip.

What are aluminum strips used for? Aluminum sheets are widely used for aluminum and plastic composite board, aluminum and plastic pipe, and bottle/tank cap, as well as curtain wallboard/aluminum curtain board, ceiling board/special-shaped ceiling board, aluminum sheets for the cable channels,domestic packaging, and electrical manufacture, etc.

Custom Width Aluminum Strip


Ⅰ-b: Our Aluminium stripe advantages.

The mass of the aluminum strip unit is very light, the vibration is very flexible, and the inertia effect of scattering and stopping is very low, so the speed response is very fast. However, aluminum strips are very light and relatively fragile.

Since the aluminum strip itself is a conductor, its impedance is too low to be coupled directly to the expander and must pass through the impedance matcher to the quality of the impedance matcher.

In addition, because the aluminum strip must have the right force, if the force is not adjusted properly, the sound performance will be affected. In addition, the aluminum strip itself is a malleable metal, and its metal fatigue problem, its tension will relax with the increase of use time.

Ⅰ-c: 1 inch and 2-inch wide aluminum strips.

1 inch wide aluminum strips mean the width of the aluminum strip is 25.4mm.

2 inch wide aluminum strips mean the width of aluminum strips is 50.8mm.

1 inch wide aluminum strip, 2 inch wide aluminum strips, thin aluminum strips use many, such as aluminous model multiple tubes, cable, optical cable, transformer, heater, blinds, etc.

Ⅰ-d: Aluminum strip commonly used materials

Aluminum manganese alloy series aluminum stripe: representative product 3003 aluminum strip. Aluminum manganese alloy aluminum strip has a certain strength, rust resistance and corrosion resistance, suitable for the strength of hardware products processing requirements, and the price is slightly higher than pure aluminum strip.

Aluminum magnesium alloy series aluminum strip: the representative products 5052 and 5754 aluminum strip have high magnesium alloy content, high hardness and good bending performance. It is suitable for bending machining parts and hardware industry with clear requirements on hardness.

Aluminum magnesium silicon alloy series aluminum strip: the representative product 6061 T6 aluminum strip. High hardness aluminum strip is one of the highest hardness of all aluminum strip products. This series of aluminum strips is not suitable for bending.

User needs to choose suitable aluminum strip according to different machining requirements.

Ⅱ: Parameters of aluminum strips

Alloy:1050,1060,1070,1100, 3003,3105,5052,5083, 6061,7075,8011, etc

Temper:HO,h16 h18 h24 h32

Width ( customized ): aluminium strip 60mm,aluminium strip 100mm,aluminium strip 80mm,aluminium strip 4mm,aluminium strip 8mm etc

Aluminum strips can be used to process parts that require good forming properties and high anti-corrosion, but do not require high strength, such as chemical products, devices, and storage containers used in the food industry, heat exchangers, welding parts, etc.

Ⅲ: Aluminium strip processing

Aluminum stripe is a deep processing product made of aluminum coil slitting. It is an important raw material in industry.
According to the different annealing state of aluminum strip, aluminum strip can be divided into full soft (O state), half hard (H24) and full hard (H18). At present, the most commonly used should be the full soft series. Because the O state is relatively easy to stretch and bend.