Folia aluminiowa na kolbę płetw

Learn about aluminum foil for fins

Applications of fin stock aluminum foil roll

Aluminum foil for fins is mainly used in air conditioner condensers and evaporators, refrigerator frost-free evaporators/finned evaporators. Obecnie, the most commonly used is hydrophilic aluminum foil.

What is hydrophilic aluminum foil

Compared with ordinary aluminum foil, the surface of hydrophilic aluminum foil is treated with a hydrophilic layer. The hydrophilic layer can make the water droplets condensed on the heat exchange sheet by the water in the hot air easily spread out and flow down the sheet, which can avoid The ventilation effect of the heat exchanger is affected by the "mostkowanie" of water droplets between the heat exchange fins, thereby increasing the heat exchange rate by 5%.

hydrofilowa folia aluminiowa

What are the types of aluminum foil for fins

1. Uncoated aluminum foil
2. Powlekana folia aluminiowa
3. Corrosion-resistant aluminum foil
4. Hydrophilic aluminum foil
5. Hydrophobic aluminum foil
6. Self-lubricating aluminum foil

Technical Specifications of aluminum foil coil for fin stock

aluminum foil for air conditioner heat exchangers fins

1. Grubość: 0.01-0.3mm
2. Szerokość: 500-1280mm
3. Materiał (stop): 1100, 3102, 8011
4. Hartować: O, H22, H24, H26

We can supply 1000series,8000series aluminium foil,etc.we also can supply according to customer's requirements.

Aluminum Foil For Fin Stock

Anti frosting coating aluminum foil for refrigerator fins

• Stopy: 1060, 1100 itp
• Grubość: 0.11mm - 0.18mm
• Szerokość: 150mm - 1240mm

New functional water ski coating is used for refrigerator heat exchanger to improve frosting and improve energy efficiency grade of refrigerator products

Briefly introduce what is the specific application of aluminum foil for heat sinks in air conditioners?

Air conditioners exchange heat with air and coolant. Jednakże, the efficiency of air transfer heat is relatively low.
In order to overcome the problem of poor air heat transfer performance, it is necessary to increase the contact area of air. Aluminum fins provide tens of square meters of surface area in contact with the air, so a reasonable amount of heat can be transferred. If you look closely at the air conditioner's fins, you'll see tubes or pipes running through them; this is where the coolant resides.

aluminum foil for heat sinks in air conditioners

Production and Application of Aluminum Coil

Oferta aluminium Huawei